VEO CSMM3 Triple Directional Cold Shoe Mount

TheVEO CSMM3allows you to mountthree accessories with a cold shoe mount base to a tripod support arm, and adjust the angle of the side cold shoe mounts by+90 to -90.

If your accessory baseneeds a 1/4″ thread, or you want to attach this cold shoe multi-mount into the hot shoe mount on your camera, you can use theVEO CSMorVEO CSM DLX.

To attach to yourtripod support arm, simply screw the 1/4″ thread into the base of the VEO CSMM3. While it would take any 1/4″ thread, to avoid the cold shoe mount unscrewing in use, we would recommend using a tripod support arm with a bayonet fitting, such as a VEO TSA DLX model.

To attach theittoyour accessory,simply slotthe accessoryinto the chosen cold shoe mount and tighten accordingly.

You can then adjust the angle of each side cold shoe mountby 180 (+90 to -90) and you can lock the position in place using an Allen key.

On the front ofthe cold shoe mount is a1/4″ thread, allowing you to attach another suitable support arm, such as one of the Vanguard Tripod Support Arms, to add further accessories.

Folding to 2.4″ wide (or a maximum of 3.5″ wide), thistriplecold shoe mountis more than just asolution for attaching accessories. If you wantto consider alternativesolutions, then check out the collection of VEO Cold Shoe Mounts.